


|
Punch Tools - Hydra
Press |
|
|
|
This Hydra Press with it's unique features has been designed primarily
to increase the productivity of those manufacturers involved
in the plastic thermo forming and die cutting industry, however,
the press can be adapted for a variety of standard uses.
It has a simple front mounted control panel allowing single,
continuous, jog and dwell functions, together with tonnage adjustment,
dwell time control and two-hand anti-tie down safety switches. |
|
 |
|
The Hydra Press has a capacity from 4 to 30 ton, platen size
is 36" x 48". The center platen can be equipped with
a quick change steel rule punch registration system, while the
bottom platen is equipped with a kiss plate which is adjustable
front to back and left to right.
Minimum and maximum shut height is 2" and 12" respectively,
approximate no load speed is 380"/minute, retractable
no load speed is 240"/minute, maximum speed at maximum
pressure is 1"/second. Cycle time choices are continuous, single and dwell (used in
foam and plastic forming applications) other control options
are available on request. |
|
|
Additional Options
• Pull true material feeding and automatic gauging systems.
• Special tooling plates.
• Air activated under bolster knock our rams.
• Slug or scrap exit conveyors.
• Requested safety devices and controls. |
|
|
Call Punch Tools today to see if the Hydra Press is the right
choice for your application.
Tel: 604.521.6444
Toll Free: 1.800.668.4996
Email: sales@punchtools.com |
|
|
|